Used as a pre-stain treatment of wooden surfaces to reduce
blotchy areas in soft woods before staining. Sand wooden surface with
150 or 180 grit sandpaper.
Apply by spray, brush or rag liberally over entire surface and remove
excess by wiping with a cloth. Allow Seal & Stain Pre-Stain/Clear
Stain Base to dry 15-30 minutes before applying any M530 or M545
stain color. Best results are achieved if the stain is applied within
12 hours. Used as a clear stain base with colorants to mix custom
colors. Up to 20% by volume of Mohawk M500
or HUL 844 tint colorants may be added to Seal & Stain
Pre-Stain/Clear Stain Base to create custom stain colors. Seal &
Stain Pre-Stain/Clear Stain Base may also be added to any M530 or M545 wiping stain to reduce color intensity.